Monday, August 31, 2009
Melange transfer challenge
When it comes to transfers my specialty is gel medium transfers. I make little "skins" as I have dubbed them. Basically you take a color or b/w copy and apply several layers of gel medium to the face. Then you moisten the paper and rub it off to reveal a thin layer of plastic (the dried gel medium) with the image from the paper embedded into the dried medium. Sounds easy, right? In theory it is. But it takes patience, practice and a steady hand. I have experimented with this process for several years, and it's some what of a signature of my work, that and the transparencies that I use.
People are always asking me how I do what I do, so I had put together a little tutorial and blogged about it. In light of the Melange transfer challenge, I have reposted the blog entries I've done about transfers. The first one is about gel medium transfers and the second one is about paint stripper transfers. The finished project to the left (Eve) above is one of my favorite transfer projects and the one I submitted to the Melange transfer challenge.
It's been great fun reading about the different methods the other members of Melange have tried- Outside of acetone transfers, and transfers from (yes) paint stripper. I am pretty stuck on the skins.... I guess when you get comfortable with something you just stick with it.
REPOST of Gel Medium Transfers :
When I'm working on collages, I like to use a lot of layers. It adds to the overall mood of the piece. One way to add layers is using elements that are transparent or semi transparent so the pieces underneath come through- You can do this is many different ways and there are tons of books out there with different techniques. This is what works well for me- It took me a while to master this process for my own habits, so you want to tackle this, you may have to make adjustments to suite your needs.
Gel medium transfers are not the easiest things to make- but for the ghostly, skin like look I want, nothing else comes close.
Start with a fresh copy of a favorite image- color or black and white-copies straight off the laser printer work best for this technique.
Clean your work surface and lay down waxed paper, freezer paper or plastic. You can go commando- but the gel medium inevitably ends up on the table and I hate to clean it up. The wax paper will keep it from sticking to your kitchen counter or dining room table. Apply a thin, end coat of gel medium to the image. I only use sponge brushes and Golden Regular Gel ( Matte). You can use heavy and glossy, it takes longer to dry, it will appear thicker, more plastic and shiny. ( not the look I'm going for, but it might work for you.)
Apply several layers (how many depends on how thick you put it on.) Usually I do three or four. Remember the coats need to be even- otherwise when you start peeling off the paper- you will get stretching and tearing.
Let the layers dry COMPLETELY before you apply another layer. After you have applied the gel medium- and the final layer is completely dry - you are ready to start peeling paper. This process usually takes me several nights. I lay out the copies and apply a layer or two every night while I'm working on some other project. Remember this whole thing takes patience.
When you are ready to peel the paper, fill your sink, small basin or shallow dish with lukewarm water. Be careful not to make the warm too hot- lay in some of your dried gel covered papers into the bath. let them sit a while- mine go in for anywhere from 5-15 minutes for the first run.
Take out your images out of the water work one at a time on a clean flat surface (i have a clear piece of plexi, i put on the counter, but you can work directly on your work surface as long as it is clean and flat)
Starting in the center of the image- I roll the paper with my fingers in circular motions till it starts to peel away. Slowly the paper will ball up and roll away and your image will appear. Keep working at it till all the paper is removed. You may have to stop and brush off the paper curls regularly. Dip the image back into the wash as needed to re-wet the paper. As the paper dries in the air it will become harder to remove.
When you are all done removing the paper- your transfer is ready to apply to your collage- I cover the area that I want to adhere it to with a light coat of gel medium, lay my image down and use the sponge brush to work out air bubbles.
I wish you luck with this technique and don't give up if you fail the first time- I still tear transfers from time to time- like this one that I ended up using in my journal.
REPOST OF A BLOG ENTRY from my old Blog: Between the Worlds
about transfers from paint stripper:
...I want to create a overlay effect with some of the photos and am working on different transfer methods. Other methods I tried, like acetone and gel medium did not work as well as this. I had
EXCELLENT results with the citrus based paint stripper.
Apply the paint stripper to the image, place the image face down on the piece you want to transfer to and burnish. I used the back of an old spoon and rubbed lighty in circular motion. Then peel the image paper from the text paper and voila! the image is transfered.
My ventilation wasn't so great. Make sure you open windows if you try this. Samples of Jennifer and Heather are attached..